BT-3KT Hot Air PVC Membrane Tent Fabric Seam Welding Machine

>PVC Membrane Tent Fabric Welding Machine
>3680W power
>No glue needed
>Large size-thick material welding
>CE, ISO
Name:

BT-3KT Hot Air PVC Membrane Tent Fabric Seam Welding Machine
BT-3KT Hot Air PVC Tent Welding Machine
Tents Welding Machine
Auto Hot-air PVC Welding Machine
Auto Hot-air Banner Welding Machine
Banner Jointer, PVC Jointer
Auto Jointer
Auto Hot-air Jointer
Ban
ner Welding Machine
PVC Welding Machine
Hot-Air Welding Machine

Technical Specification:
Model
BT-3KT
Rated Voltage
AC220V
Frequency
50-60Hz
Power
3680W
Temperature Scope
40-650°C±1°C
Speed Scope
1-15m/min
Dimension
60x43x30cm
Weight
30kg
Seaming Width
40mm

Application:
The machine is widely used to weld large size PVC-P, ECB, EPDM, CSPE and TPO materials, such as roofing material, container tents, PVC tarpaulin, PVC water bed, swimming pool, plastic membrane material, inflatables jointing and mending etc, as well as truck water-proof tents joint welding.

Product pictures the machine can weld:

Technical Feature:
1. No glue needed.
2. Advanced hot air welding technology.
3. Digital temperature display to show the actual welding temperature, continuous adjustable and high precision.
4. Especially good at high temperature continuous using, long working life, high reliability.
5. The welding pressure is adjustable according to the thickness of material-welded.
6. The welding-joint is smooth and with high ability of anti-stretch and anti-laniate.
7. High welding speed, high efficiency, high welding precision, limitless welding length.

Operation Procedure:
1. Stretch the tarpaulin and make it smooth, butt joint the 2 parts of tarpaulin needing welding (seaming width 2-5mm) and fix them onto the flat ground by adhesive tape or glue.
2. Open power, set welding temperature and welding speed (according to tarpaulin thickness and operator’s proficiency), warm-up the machine.
3. When temperature reaches the set-value, move the 2 wheels edge (two points, one line) to the welding-joint. Take the hot air gun switch with right hand, put the gun mouth enter the welding-joint and start welding automatically.
4. Observe the machine during welding, control the handle slightly to make sure the machine weld along straight line.
5. If the tarpaulin is burnt, please speed up the machine.
6. After finishing welding, take out the gun mouth and put it at proper position, switch off the heating button and the machine will stop working automatically, no need shut down the power.
7. It is forbidden to use the machine when it rains. The ground must be dry and flat.
8. The machine must be operated by specially-assigned person, don’t disassemble it without authorization.
Warranty:
12 month.

We have working video to tell you how to use the machine.