digital flex banner welding machine

>digital flex banner welding machine
>Factory price
>Moq :1
>Delivery fast

digital flex banner welding machine
Model :4000L , 4000i



Operation of PVC welder:
1. Choosing a working place relatively smooth before hemming and welding, leaving 3040mm width of overlap edge for connecting the two pieces, fixing both ends of each piece with something such as adhesive tap or clamp.
2. Opening the package and checking the machine is not broken, plugging the machine, and turning on it by pressing the power key for 3 seconds, after these, adjusting the temperature and speed knobs according to the material quality and the thickness of your material, you could adjust the suitable hot-air blowing rate by press the switch key. Before working, you must pre-heat the machine about 2 minutes.
3. Bringing up the machine, placing the pressing roll at the end of overlap edge.
4. Handling the welding gun to left down, inserting the spout into the gap of the two overlap pieces, then the machine begin to run and joining the two pieces of the PVC material together automatically.

Technical data

MODEL No.
MODEL 4000I WELDING
MODEL 4000L WELDING
VOLTAGE/FREQUENCY
220V+/-10%,50HZ & 110V+/-10%,40-60HZ Optional
220V+/-10%,50HZ
POWER CONSUMPTION
0.80KW-1.00KW
1.50KW-2.00KW
MACHINE VOLUME
(Length *Width*Height mm)
L420mm* W280mm*H220mm
L420mm*W300mm*H240mm
ADJUSTABLE TEMPERATURE
0-560 degree centigrade
0-650 degree centigrade
ADJUSTABLE SPEED RANGE(m/min)
0-10.0 meters/minute
0-12.0 meters/minute
ADJUSTABLE BOLWING RATE OF HEATED AIR
40-100%
Screen Display: “F0-30”
40-100%
Screen Display: “F0-30”
TIME OF POWER-OFF AUTO
No operation in 15 minutes
No operation in 15 minutes
NET/GROSS WEIGHT (KG)
9.0/10.0KG
9.5/10.0KG
WELDING OVERLAP WIDTH
10-50mm
10-50mm
WELDING MATERIAL THICKNESS
0.5-3mm
0.5-5mm
PACKAGE DIMENSIONS
(cm)
L48cm*W32cm*H32cm
L48cm*W32cm*H32cm

Picture of package