T962 INFRARED IC HEATER AND REFLOW OVEN

T962 INFRARED IC HEATER AND REFLOW OVEN
1.BGA rework station
3. IC heater
4. good quality
5, Useful for repair and reballing
T962 INFRARED IC HEATER AND REFLOW OVEN

The T962 is a micro-processor controlled reflow oven. The device is powered by standard 110VAC 50/60HZ (220VAC Model is available). User interface is implemented by way of T962 input keys and an LCD display. Pre-Set heating Modes are selected by user interaction with thermal cycle progress observed on LCD display.
This self-contained reflow station allows safe soldering techniques and the manipulation of SMD,BAG and other small electronic parts mounted on a PCB assembly. The T962 may be used to automatically “re-flow” solder to correct bad solder joints, remove/replace bad components and complete small engineering models or prototypes.

A windowed drawer is designed to hold the work-piece. Thermal cycle accuracy is maintained by closed loop micro-computer control with infrared heaters, thermocouple and circulating air.

The T962 is simple to use, the soldering process is completely automatic defined by pre-defined thermal cycles,


FEATURES

The T962 is a self-contained Micro-Processor controlled IC Heater and solder rework station.

Uses up to 800 watts of energy efficient Infrared heating and air circulation to re-flow solder in a large
180×235mm
area.

Parameters of Eight (8) Soldering cycles are Pre-Defined

Soldering cycles are keypad selected and progress displayed on the T962 LCD.

A single windowed drawer holds assemblies within the heating chamber,

The T962 design is ergonomic, practical and easily operated.

The entire soldering process is completes automatically from
Preheat
,
Soak
and
Reflow
through
cool- down.

The T962 design is ergonomic, practical and easily operated.

The T962 is an economical rework solution from single runs to on-demand small batch production.

Light weight and a small footprint allows the T962 to be easily bench positioned transported or stored.

The T962 can solder most bosseyed or double-face PCB boards’ small parts, ie.: CHIP,SOP,PLCC,QFP,BGA etc; Can be used to the gum of the product solid, turning the circuit board hot aging, maintaining the PCB board and so on. Be satisfied to the needs of ”academe”, “smallorder run” and “extensively development of enterprise & company”

Technical Parameter
Supply Voltage
AC110V/ 50Hz AC220V /52Hz
Putout Power
800W
Maximum Soldering Area
180×235 mm
Temperature Range
100°C-350°C
Cycle Time
1~8 min

Parts Inventory
Description
Quantity
Illustration
T962 Main Assembly
1

Power Cable
110VAC or 200VAC
1

5mm Fuse, 10A 250VAC
Fast Blow (Spare)
1

This Manual on CD
1