Tandem sub arc welding tractor

Tandem sub arc welding tractor
Tandem sub arc welding tractor, can be equipped with two power sources.
Tractor features
The imported special wire feed and travel motor with durable steel base stabilize the performance.
Four wheel drived, traveling steadily.
The protection against short circuit of control cable prevents damage to the PCB caused by internal short of control cable, short between control cable and the workpiece or the output cable.

Anti-interference of high frequency, which prevents damage to the PCB caused by high frequency and voltage generated by the working TIG welder surrounding.
Intuitive digital display on welding parameters features accurate presettable display for easy operation.
The touch sensing function, with precise control of wire retracting, makes the arc striking easier and get ignition rate of 100%.
The arc can also be striked by scratching, to fit different working conditions.
Adjustable torch space. Both torches can be adjusted horizontally simultaneously. Each torch can be independently adjusted for vertical direction, front-and-back tilt and right-and-left tilt, to fit different processes.
Widely used in various SAW applications such as flat position welding , fillet welding in flat position.
The two torches can weld simultaneously or separately, to meet different requests.
Rated specification
Model
MZC-1000M
MZC-1250M
MZC-1600M
Applicable wire diameter
mm
2.4/3.2/4.0/4.8
3.2/4.0/4.8/6.4
Arc striking mode
-
Retracting / Scraping
Wire feed speed
m/h
20-200
16-160
Welding speed
m/h
9-75
Cross slider board adjustment
mm
150x150
(
Horizontal
×
Vertical
)
Base board adjustment
mm
70
Rotating angle
-
360o
Adjustable angle of the welding head
-
45o
Front-and-back adjustment of welding head
-
45o
Flux capacity
L
8
Wire reel capacity
kg
25
×
2
Dimension
(
W
×
D
×
H
)
mm
1000
×
600
×
950
Net weight
kg
120