Multifunctional TIG Welding Machine ITG222P

WIM brand TIG welding machine
1. CE & ISO approved
2. Superior quality welds
3. Free of spatter and Low distortion
WIM brand Multifunctional TIG Welding Machine (Model : ITG222P)
FEATURES
1. Full function DC TIG with high speed inverter technology and high frequency starting standard
2. Pulsed DC capability with full control of all pulsing parameter
3. Excellent low arc performance
4 Make quick change between TIG and MMA welding
5. Completely portable unit
6. 1 years limited warranty

TECHNICAL DATA
AC Rated Voltage
1 Phase AC 230V(+15%-20%) 50/60Hz
Rated Frequency
50 / 60Hz
Rated Duty Cycle
Rated Duty Cycle: 40%(at 10 Minutes Duty Cycle)
DC Rated Output Current
TIG: 5A-200A

STICK: 5A-130A
DC Rated Output Voltage
DC Rated Output Voltage:

TIG: 18V STICK: 25.2V
Pre Flow Time
Fixed 0.1 Sec.
Post Flow Time
2-10 Sec
Start Current
TIG=5A~200A
Crater Current
ITG=5A~200A
Pulse Frequency Range
Low: 10-40Hz

High: 125-500Hz



STANDARD ACCESSORIES

Argon Regulator TIG Torch Set



Earth Clamp



PACKAG & STOCK




Working environment

1.
Main supply
. Welding equipment should be connected to the main supply according to the manufacturer recommendations. If interference occurs, it may be necessary to take additional precautions such as filtering of the main supply. It should be taken measures to shielding teh supply cable fo permanently installed welding equipment, in metallic conduit or equivalent. Shielding should be electrically continuous throughout its length. The shielding should be connected to the welding power source so that good electrical contact is maintained between the conduit and the welding power source enclosure.
2.
Maintenence of the welding equipment
. The welding equipment should be routinely maintained according to the manufacturer recommendations. All access and service doors and covers should be closed and preperly fastened when the welidng equipment is in operation. The welding equipment should not be modified in any way except for those changes and adjustments covered in the manufactureres instructions. In particular, the spark gaps of arc striking and stabilizing devices should be adjusted and maintained according to the manufacturer recommendations. Welding cables. The welding cables should be kept as short as possible and should be positioned close together, running at or close to the floor level.