Cost-effective ZX-CP200 BGA repair station

BGA repair station
Three independent heater
Pickup,place and reflow component
Can connect with computer
BGA repair station/BGA rework station
Features:
1.With PLC user interface control, display actual temperature of three zone and a test temperature curve;
2.With three independent temperature zone control, upper and bottom main heater with hot air to heat, third zone with infrared to preheat;
3.Three heater with 9 segment temperature up (down)+9 segment constant temperature control, can store 40 groups temperature curve;
4.Three heating zone with independent PID to control heating process, more stable and accurate;
5.Bottom heater and IR preheating zone with supporter to prevent welding zone part deformation;
6.After removal and welding with cooling fan to cool PCB board, ensure welding effect;
7.Temperature profile parameter with password protection;
8.Equipped with a variety size of hot-air nozzle, or made according to special requirements;
9.Build-in vacuum pump, no need gas source.
Specifications
PCB Size
≤L540×W450mm
PCB thickness
0.1~5mm
Temperature Control
K thermocouple PID Closed loop
PCB Positioning mode
Outer
Bottom preheat
Infrared 2400W
Main (Top+bottom) heater
Hot air 800W+800W
Power supply
Single phase 220V,50/60Hz,4.0KVA
Dimension
L700×W490×H600mm
Weight
Approx. 38kgs