MIG-27OIGBT Inverter MIG CO2/MAG welding equipment

1. MIG/MAG CO2 welder.
2. Inverter MIG welding equipment.
3. Internal wire feeder welding machinery.
IGBT inverter technology,current-mode control,reliable quality,stable performance.Closed loop feedback cpontrol,constant voltage output,fit for wide voltage range(±15%).Controlled by electronic reactor,stable welding performance,little splash,deep penetration,good welding bead.Slow wire feeding during arc starting,remove the tip ball after welding,easy arc-starting.Suitable for steel board with a thickness of more than 0.8mm.Small size,light weight,easy operation,economical and practical,stable welding can be realized at the current of 30A when using welding wire a diameter of 0.6mm,can be widely used in automobile,steel door&window,furniture and other industry.Cost-saving,can completely replace welder with taps.
1. Rated input power voltage(V) : AC 380V±15%
2. Frequency(HZ): 50/60
3. Rated input power capacity(KVA): 6.4
4. Input current(A):29
5. Rated output current(A): 270
6. Output current range(A): 50-270
7. Output voltage range(V): 15-26
8. Duty cycle: 60%
9. Efficiency(%): 85
10. Power factor: 0.85
11. Insulation class: F
12. Protection class of case: IP21
13. Wire feed speed(m/min): 2-15
14. Diameter of coil(mm): 270
17. Diameter of wire(mm):0.8-1.0
15. Weight(kg): 26.5
16. Dimension(mm): 500×273×440