BGA Rework Station
Bga rework machine
5 thermocouple ports bga
Automatic bga rework station
PLC control
Features:
6 spindles linkage,all the movements driven by 7 motors.Air head/PCB movements and optical locating system X/Y movenents are all controllde by rockers.Easy operation.It is equipped with memory function suitable for mass reparation and wkll improve the efficiency.
Hot air head and mounting head are desingnde 2 in 1 with soldreing and desoldering automatically.
Upper and lower heaters are taking IR + hot air mix heating. Upper is with 2channels. IR heater works toward thd heating area in the meanwhile the hot air works. Thus the two heating methods can make up each other to speedy heat the PCB(The temp.goes up at rate 10C/S),and the temp.remains even.
Separate 3 heating zones.Upper and liwer heaters to be one move together and can move in X,Y directions within bottom preheating area.Lower air head can move up/down and support PCB controlled by motor automatically,Upper and lower heater as one can move to the BGA when the PCB is fixed on the jig
Original bottom preheating board is made of bood quality heating heating material(IR plated heater)imported from Germany + constant temp.Glass(temp. Resistance up to 1800C),preheating area is up to 500*420mm.
Preheating board, jigs and cooling system can move as one unit in X direction that make licating PCB and desoldering more security and convenient.
The unique design of X,Y direction movement takes good use of the equipment space. It can rework super big PCB in the small size machine .The max.PCB size is up to 630*610mm
The jig device is with locating scale .The system can memorize historical locating scales that makes repeat locating very quickly and convenient.
Automatically take and place components on the jigs with locating scales.
Embedded vacuum pump.angle rotates in 360.contrlled by stepping motor,with memorizing function,precisely fine-adjusting and mounting nozzle.
Nozzle detects the height of placing and mounting automatically,the pressure can be limitde in 10 grams. It can take and mount small BGA under 0 pressure.
Color optical vision system, with prismatic,double colors,zoom in and fine-adjusting functions ,equipped with aberration distinguish device,auto-zoom, software operation,wireless remote control 27X optical zoom,k can rework BGA in maz.size 7070mm.
Embedded industrial computer,touch screen interface.PLC conreol. Real-time temp.profile display.display and analyze the setting profiles and actual measured profiles.
8 segments up/down temp.+8 segments constant temp. Control, can save agreat deal of profiles, analyze the profiles on the touch screen.
Many size alloy hot air nozzle are easy to be replacede and can rotate and locate in 360.
Equipped with 5 thermocouple ports, can monitor and analyze the real-timetemp.for multiple points.
Azote gas can be connected in to secure the rework.
Other optional functions
It generates 30°Ctemp. Difference between the heating area and around area to protect the small BGA around not up to the melt point.The function is special for the cell phone and laptop.
The current seniautomatic optical system can be updated to full automatic sysem.
The current embedded industrial computer can be replaced to universal software controlled, compatible with printe,barcode scan.
The current auto-operation function can be replaced to manual operation. The cost will be decreased and be economical for more customers.
Technology parameter
Style NO.
WDS-780
Maximum PCB size
L630*W 610mm
PCB thickness
0.5~3.5 mm
Chips apply
1*1~70*70mm
Chip minimum space apply
0.15mm
Mounting maximum weight
500g
Mounting precision
±0.0 1mm
PCB locating way
Outer or
Working station micro-adjust
Forward/backward ±15mm, left/right±15mm
Temperature controlling way
K-type thermocouple, closed loop control
Lower hot air heating
Hot air 800W
Upper hot air heating
Hot air 1200W
Bottom pre-heating
IR 6000W
Power applies
Three phases: 380V, 50/60 Hz
Machine size
L970*W700*H140mm
Machine weight
About 170 KG
No comments:
Post a Comment