J Series CO2 / MIG / MAG tractor

CO2 MAG
MIG
First choice for long GMAW fillet welding
Tractor features
With low gravity, stable tractor base and powerful dragging ability makes welding more steadily.
With the integrated design of wire feed mechanism and the tractor, it is not restricted by the cable length any more, and it can readily deal with long welds.
The light torch adjustment mechanism makes the adjustment finer and more precise.
The 1.5mtrs long torch has smaller wire feed resistance, the welding current is stable.
It can make flat weld and fillet weld with the adjustment of the torch angle.
The tractor can be attracted to the vertical plate by its magnetic wheel and realize simple weld tracking, so that it can make fillet welding perfectly without using guide rails.
It can connect with Panasonic gas shield welding power source conveniently to build up a set of small economical and practical automatic welding equipment.
The value of welding current, voltage and speed can be read from the panel, and they can be adjusted at any time, which is very convenience.
Wire feed, start and stop, and travel direction can be controlled from the panel.
Japanese Mitsubishi PLC and drivers control the German stepping motor, which can easily set the oscillation frequency, range, and right-and-left dwell time, to adapt to different CO2/MAG welding processes.
The parameters such as oscillation frequency and range can be set at any moment by the switches on the panel.
The oscillation center can be set at any moment by the switches on the panel.
Even the workpiece have larger clearance, it can weld properly under oscillating control.
Rated specification
Model
MZC-630J13
MZC-630J19
Applicable wire diameter
mm
1.2/1.4/1.6
Wire feed speed
m/h
140-1280
Welding speed
m/h
6-60
Adjustable range of welding head
mm
60x60
300x300
Linear oscillation rate
mm/min
-
30-1500
Linear oscillation range
mm
-
2-40
Adjustable angle of welding head
-


45
°
Front-and-back adjustment of welding head
-


45
°
Wire reel capacity
kg
20
Dimension
(
W
×
D
×
H
)
mm
445
×
460
×
850
610
×
515
×
1050
Net weight
kg
30
50
Model
Suitable power source
MZC-630J03
MZC-630J09
Panasonic KR
,
KH series power source
MZC-630J03B
Panasonic AG series power source
MZC-630J09B
MZC-630J03C
Panasonic GR3 series power source
MZC-630J09C