Promotion!!! Reinforcing Mesh Welding Machine (12years factory)

welding wire diameter:3-5mm
wdith:2500mm
mesh size:50x50-200x200mm
ISO9001&CE Certification
Our welded wire mesh machine has the following major advantage:
1. Main machine frame is welded with the thicker steel panel and steel bar. The main structure is more well-set and compact.
2. The cross wire feeding hopper is originative. The cross wire feeding is automatic and driven by step motor, which makes the cross wire aligning more accurate.
3. The mesh pulling system is controlled by step motor, which makes the pulling mesh aperture more standard and accurate.
4. The mesh aperture size welded is diversified. The line wire spacing can be adjusted through the related parts. The cross wire spacing adjusting is controlled by microcomputer and it can have 10 different styles.
5. Welding adopts late-model efficient welding transformer. The voltage adjusting range is big and it can fall into eight different grades, which enlarge the range of wire diameter size.
6. In order to adapt the capacity of the clients’ main power transformer and reduce the rush of the current, electric and electronic welding control adopt the separating control electricity input, i.e., the welding transformers don’t work at the same time but in several times when welding the same row of cross wires.
7. Electric and electronic welding control system adopts synchronous control technology. The welding time and separating control welding is composed of numeric integrated circuit, which is with high control precision and stable function.
The machine can be used to produce the mesh for guard rail of road, railway, hills, fencing, mesh for casting of building roofs, etc.
Model
ABE-3/5-1500
ABE-3/5-2000
ABE-3/5-2500
Mesh width
1500mm
2000mm
2500mm
Line wire spacing
50-100mm
50-100mm
50-100mm
Numbers of welding points
30
40
48
Transformer
4* 75KVA
5 * 75KVA
6*75KVA
Cross wire spacing
50-200mm
Wire diameter
3-5mm
Max welding capacity
5.0+5.0mm with standard quality
Max welding speed
30-40 cross wires per min
Mesh pulling way
Numerical control
Cable
3 pcs of copper cable with cross section area of 95mm2 or aluminium cable with cross section area of 120mm2,the distance between the machine and the power transformer should be less than 30m
Welding way
Resistance welding controlled by Silicon-controlled rectifier (hereinafter called as SCR)
Welding voltage
Adjustable in eight different grades through welding transformer
Pressurizing way
By changing the length of tie rod in pressurizing beam and the compression of the upper electrode spring
Cross wire feeding way
The cross wire fall off the feeding hopper into welding automatically one by one driven by step motor