Promotion!!!4-8mm Reinforcing Mesh Welding Machine (12years factory)

welding wire diameter:4-8mm
wdith:3000mm
mesh size:50x50-300x300
ISO9001&CE Certification
1.Capacity
4-8mm reinforcing mesh welding machine is the specialized equipment for wire mesh fence that the wire are feed in pre-straightened and cut. This machine welds the line wires and cross wires of the steel to be solid mesh in the principle of multi-electrode resistance welding.
It consists of welded equipment, line and cross wires feeding device, mesh stepping system, mesh laying and convey device, pneumatic system, electrical control system and cooling system. The material can be rolled ribbed steel wire, cold or hot rolled round steel wire.
Working process of the pre-cut reinforcing mesh welding line: line wire is put in place automatically → cross wire is blanking automatically → pneumatic cylinder goes down →start power to weld →remain the power cut-off → pneumatic cylinder goes up →the mesh took away from the electrode by the system →servo motor drives the mesh to needed place →cross wire is blanking automatically.
2.Main Parameter
This machine is automatically controlled by PLC programmable controller with the LCD display. The work parameters are set and modified by specialized industrial company.
Mesh traction step system uses the international advanced servo drive mode, and select the Japanese branded all-digital servo motor and controllers. The cross wire distance is adjustable and the size is precise.
The single welding or sub-welding can be chosen according to power supply situation.
It has several self-security-protection function: cooling water pressure or flow control, pneumatic pressure monitoring system, the working place monitoring, overload power system monitoring, emergency switches and security guards.
Model
ABE-4/8-3300
ABE-4/8-3000
ABE-4/8-2400
Mesh width
3300mm
3000mm
2400mm
Max. length of mesh panel
6000mm
6000mm
6000mm
Welding points
33
30
24
Transformer
8*125KVA
8*125KVA
6*125KVA
Line wire spacing
100mm, 150mm, 200mm
Cross wire spacing
50-300mm, step-less adjusted automatically
Line wire diameter
4-8mm Pre-cut wires
Cross wire diameter
4-8mm Pre-cut wires
Max welding speed
60 ~ 80 cross wires per min
Requirement of air compressor
(0.7Mpa) 4.5m ³/min
Pressure of cooling water
0.3-0.4MPa
Mesh tolerance
±2mm/m
Pressure of pneumatic system
≥0.8
Electric power of Transformers
125KVA 380V 50-60Hz 3Phase